Shacman · 6x4 · CL5251ZYS6SJ
Shacman 6x4 Garbage Compactor Truck — CL5251ZYS6SJ
The Shacman CL5251ZYS6SJ garbage compactor truck combines a Chengli collection body with a Shacman SX1250MP6444C chassis for route-based waste collection. The rear loading arrangement handles two 240 L bins. Select the engine, body volume and loading equipment together, then confirm the waste stream, route access and destination requirements before ordering.
- Overall length
- 10310 mm
- Overall width
- 2550 mm
- Overall height
- 3450 mm
- Wheelbase
- 4375 + 1400 mm
- Gross vehicle weight
- 25000 kg
- Curb weight
- 15700 kg
- Rated payload
- 9170 kg
- Hydraulic system pressure
- 18 MPa
Chassis & body
Two makers. One working vehicle.
This garbage compactor truck is built by Chengli (CLW) on a Shacman chassis. The chassis is manufactured by Shacman; the body and working system are manufactured by Chengli.
Supply scope: complete vehicle.
Working capabilities
Read the numbers in context.
Match the collection interface
For routes using two 240 L bins per lift, check the bin engagement and available loading clearance before agreeing the lifting arrangement.
Bin geometry, contents and the working area affect the loading arrangement.
Choose the rear-body arrangement
Choose the body shape with the intended container arrangement and unloading location. Ask for a drawing of the rear equipment in its working position.
The space available around the vehicle governs access during collection and unloading.
Coordinate operating controls
Specify automatic or manual operation together with the control panel position and the operator working area. Confirm the control sequence during the configuration review.
Operator access and the collection procedure must suit the chosen arrangement.
Fits
Assess this configuration for
- Waste collection routes with the waste stream and collection cycle defined.
- Two-bin collection with the 240 L bin interface and lifting clearances confirmed.
- Collection and unloading locations assessed for the complete vehicle and rear equipment.
Further assessment
Review the configuration when
- Tight entrances without a swept-path and working-clearance review; compare smaller garbage truck configurations.
- An unverified waste stream or container interface; agree the collection body and permissible load before ordering.
This chassis
Why the chassis details matter.
The SX1250MP6444C chassis uses a 4,375 + 1,400 mm wheelbase and a 6x4 drive layout. Check the full 10,310 mm vehicle length against collection lanes and unloading access, with additional space for the rear loader to move. The YCK08300-60 and YCK08350-60 engine options must be matched to the selected control and hydraulic equipment. Define the waste stream and bin arrangement before choosing the 18–20 m³ body configuration; body volume and the 9,170 kg rated payload are separate limits.
Configuration & trade-offs
Make the body work for the route.
Square body and alternative lifting racks: specify the chosen arrangement in the quotation.
Specification sheet
The details, grouped for comparison.
Chassis and powertrain
| Chassis model | SX1250MP6444C |
| Drive form | 6x4 |
| Engine model options | YCK08300-60 / YCK08350-60 |
| Engine power options | 221 / 257 kW |
| Wheelbase | 4375 + 1400 mm |
| Tire specification | 11.00R20 18PR |
Dimensions and weights
| Gross vehicle weight | 25000 kg |
| Curb weight | 15700 kg |
| Rated payload | 9170 kg |
| Overall length | 10310 mm |
| Overall width | 2550 mm |
| Overall height | 3450 mm |
| Wheelbase | 4375 + 1400 mm |
Body and tank
| Body type | Garbage compactor body |
| Effective body volume options | 18–20 m³ |
| Body material | T420 steel |
| Body shape options | Curved / square |
Working system
| Bin arrangement | Two 240 L bins; confirm interface drawing |
| Control method options | Automatic / manual |
| Control system | CAN bus |
| Control panel | Silicone button control box |
| Hydraulic system pressure | 18 MPa |
| Hydraulic pump | Hefei Wanye dual pump |
A configuration-specific quote
What the price depends on.
The quotation depends on the selected chassis and engine, body arrangement, loading equipment, controls, destination and delivery scope.
Please include
- Destination country and port
- Waste type, density and collection cycle
- Bin drawings and loading method
- Collection route, entrances and unloading location
- Preferred engine and body-volume option
- Required control mode and rear equipment
- Inspection documents and delivery scope
Buyer questions
Before you choose this configuration.
Who makes the chassis and collection body?
This garbage compactor truck is built by Chengli (CLW) on a Shacman chassis. The chassis is manufactured by Shacman; the body and working system are manufactured by Chengli.
Which engine can I choose?
Engine options are YCK08300-60 or YCK08350-60. Confirm the compatible power rating and hydraulic equipment for the chosen engine.
Does the body volume establish the permitted waste load?
No. The 18–20 m³ body options and 9,170 kg rated payload describe separate limits. Confirm the exact configuration, waste density and axle loading together.
Which bins does the loading arrangement use?
The arrangement uses two 240 L bins. Provide bin drawings to check engagement and lifting clearance; alternative lifting racks are optional.
How much access space is needed?
Check the 10,310 × 2,550 × 3,450 mm vehicle envelope and the 4,375 + 1,400 mm wheelbase. Allow additional room for turning, rear loading and unloading movements.
What should I send for a quotation?
Send the destination, waste stream, bins, route, collection cycle and preferred engine, body and control options.
Continue planning.
Request a Quote
Bring your operating brief.
Tell us the load, working duty, route and destination. Include this configuration in your request.
CL5251ZYS6SJ
Specifications last reviewed: 2026-10-25 · Chengli Automobile (Wuhan) Co., Ltd.