JAC · CLW5080ZYSH6
JAC 8 m³ Garbage Compactor Truck
The JAC CLW5080ZYSH6 garbage compactor truck combines a Chengli body with a JAC chassis for route-based waste collection. The eight cubic metre JAC specification uses a different engine and wheelbase from the four cubic metre model. Confirm the working equipment, loading limits and destination requirements for the selected configuration before ordering.
- Overall length
- 7126 mm
- Overall width
- 2130 mm
- Overall height
- 2600 mm
- Wheelbase
- 3845 mm
- Body volume
- 8 m³
- Rated payload
- 2,185 kg
- Number of axles
- 2 axles
- Number of road tires
- 6 tires
Chassis & body
Two makers. One working vehicle.
This garbage compactor truck is built by Chengli (CLW) on a JAC chassis. The chassis is manufactured by JAC; the body and working system are manufactured by Chengli.
Supply scope: complete vehicle.
Fits
Assess this configuration for
- Collection routes with the waste stream and collection frequency defined.
- Bin handling with drawings and loading interface agreed for this body.
- Collection and unloading points assessed for vehicle and rear equipment clearance.
Further assessment
Review the configuration when
- Restricted access without a vehicle and operating-clearance assessment; compare vehicle types before selection.
- A waste stream or container without a confirmed loading interface, material compatibility and permissible load; compare collection configurations before choosing the body.
This chassis
Why the chassis details matter.
The eight cubic metre JAC specification uses a different engine and wheelbase from the four cubic metre model. Compare both the waste mass per stop and the collection point access before deciding between them. The chassis is HFC1041P23K1C7ZS, with wheelbase 3845 mm. Provide the destination, route constraints and required working equipment so the offered configuration can be checked as a whole.
Specification sheet
The details, grouped for comparison.
Chassis and powertrain
| Chassis model | HFC1041P23K1C7ZS |
| Engine model | D30TCIF2 |
| Wheelbase | 3845 mm |
| Number of axles | 2 axles |
| Number of road tires | 6 tires |
| Fuel | Diesel |
| D30TCIF2 engine power | 120 kW |
| D30TCIF2 engine displacement | 2977 ml |
Dimensions and weights
| Gross vehicle weight | 8280 kg |
| Curb weight | 5900 kg |
| Rated payload | 2185 kg |
| Overall length | 7126 mm |
| Overall width | 2130 mm |
| Overall height | 2600 mm |
| Wheelbase | 3845 mm |
Body and tank
| Body type | Garbage Compactor body |
| Volume | 8 m³ |
| Body material | Q345 steel |
Cargo body and configuration options
| Overall dimension (L × W × H) | 7126×2130×2600 mm |
Working system
| Control options | PLC / CAN; select the quoted system |
| Operating control | Cab control |
| Remote control | Wireless remote control |
| Wastewater collection | Collection tank or compartment |
A configuration-specific quote
What the price depends on.
The offer depends on the selected chassis, body, working equipment, destination and delivery scope. Send an operating brief for a configuration-specific quotation.
Please include
- Destination country and port
- Daily route and access restrictions
- Cargo or liquid and required working duty
- Required body volume, dimensions and loading interface
- Chosen chassis, engine and steering requirements
- Required working equipment and receiving connections
- Delivery scope, inspection documents and timing
Buyer questions
Before you choose this configuration.
Who makes the chassis and body?
This garbage compactor truck is built by Chengli (CLW) on a JAC chassis. The chassis is manufactured by JAC; the body and working system are manufactured by Chengli.
Which chassis and engines are available?
The chassis is HFC1041P23K1C7ZS. The engine is D30TCIF2. Select a compatible complete specification.
How should I use the capacity figure?
The body volume is 8 m³. Volume is not a permitted load or a guaranteed operating output.
Which dimensions should I check for the route?
Check the overall vehicle length, width and height together with the wheelbase. Add the working clearance for doors, loading equipment and access to the receiving or unloading point.
What information is needed for a quotation?
Send the destination, operating duty, load, route, preferred chassis and required working equipment. Include the body and interface drawings where relevant.
Continue planning.
Request a Quote
Bring your operating brief.
Tell us the load, working duty, route and destination. Include this configuration in your request.
CLW5080ZYSH6
Specifications last reviewed: 2026-10-25 · Chengli Automobile (Wuhan) Co., Ltd.