Dongfeng · CLW5120ZYS6
Dongfeng 10 m³ Garbage Compactor Truck
The Dongfeng CLW5120ZYS6 garbage compactor truck combines a Chengli body with a Dongfeng chassis for route-based waste collection. Select the chassis and working equipment together, then confirm the loading limits, route access and destination requirements for one complete configuration before ordering.
- Overall length
- 7580 mm
- Overall width
- 2400 mm
- Overall height
- 2950 mm
- Wheelbase
- 3800 mm
- Body volume
- 10 m³
- Rated payload
- 4,620 kg
- Number of axles
- 2 axles
- Number of road tires
- 6 tires
Chassis & body
Two makers. One working vehicle.
This garbage compactor truck is built by Chengli (CLW) on a Dongfeng chassis. The chassis is manufactured by Dongfeng; the body and working system are manufactured by Chengli.
Supply scope: complete vehicle.
Fits
Assess this configuration for
- Collection routes with the waste stream and collection frequency defined.
- Bin handling with drawings and loading interface agreed for this body.
- Collection and unloading points assessed for vehicle and rear equipment clearance.
Further assessment
Review the configuration when
- Restricted access without a vehicle and operating-clearance assessment; compare vehicle types before selection.
- A waste stream or container without a confirmed loading interface, material compatibility and permissible load; compare collection configurations before choosing the body.
This chassis
Why the chassis details matter.
The Dongfeng EQ1125SJ8CDC chassis has a 3,800 mm wheelbase. Confirm the loading interface and body construction against the bins used on the collection route. Include the bin dimensions, lifting clearance, waste stream and unloading arrangements in the brief before choosing the rear loading equipment. The chassis is EQ1125SJ8CDC, with wheelbase 3800 mm. Provide the destination, route constraints and required working equipment so the offered configuration can be checked as a whole.
Specification sheet
The details, grouped for comparison.
Chassis and powertrain
| Chassis model | EQ1125SJ8CDC |
| Engine model | D25TCIF1 |
| Wheelbase | 3800 mm |
| Number of axles | 2 axles |
| Number of road tires | 6 tires |
| Fuel | Diesel |
| D25TCIF1 engine power | 110 kW |
| D25TCIF1 engine displacement | 2499 ml |
Dimensions and weights
| Gross vehicle weight | 11995 kg |
| Curb weight | 7180 kg |
| Rated payload | 4620 kg |
| Overall length | 7580 mm |
| Overall width | 2400 mm |
| Overall height | 2950 mm |
| Wheelbase | 3800 mm |
Body and tank
| Body type | Garbage Compactor body |
| Volume | 10 m³ |
| Body bottom plate thickness | 3 mm |
| Body side panel thickness | 4 mm |
Cargo body and configuration options
| Overall dimension (L × W × H) | 7580×2400×2950 mm |
Working system
| Wastewater collection | Collection tank or compartment |
| Bin interface | 240 / 120 L bins; confirm interface drawing |
A configuration-specific quote
What the price depends on.
The offer depends on the selected chassis, body, working equipment, destination and delivery scope. Send an operating brief for a configuration-specific quotation.
Please include
- Destination country and port
- Daily route and access restrictions
- Cargo or liquid and required working duty
- Required body volume, dimensions and loading interface
- Chosen chassis, engine and steering requirements
- Required working equipment and receiving connections
- Delivery scope, inspection documents and timing
Buyer questions
Before you choose this configuration.
Who makes the chassis and body?
This garbage compactor truck is built by Chengli (CLW) on a Dongfeng chassis. The chassis is manufactured by Dongfeng; the body and working system are manufactured by Chengli.
Which chassis and engines are available?
The chassis is EQ1125SJ8CDC. The engine is D25TCIF1. Select a compatible complete specification.
How should I use the capacity figure?
The body volume is 10 m³. Volume is not a permitted load or a guaranteed operating output.
Which dimensions should I check for the route?
Check the overall vehicle length, width and height together with the wheelbase. Add the working clearance for doors, loading equipment and access to the receiving or unloading point.
What information is needed for a quotation?
Send the destination, operating duty, load, route, preferred chassis and required working equipment. Include the body and interface drawings where relevant.
Continue planning.
Request a Quote
Bring your operating brief.
Tell us the load, working duty, route and destination. Include this configuration in your request.
CLW5120ZYS6
Specifications last reviewed: 2026-10-25 · Chengli Automobile (Wuhan) Co., Ltd.